Model TC3005
Fiber Optic Mode Converter/Repeater
-
Data Rates Up to 200 Mbps
 |
 |
|
TC3005S Standalone Unit
|
3 X
TC3005R (Housed in TCRM192)
|
Features
Product or Application Questions (click
here)
- Converts Multimode to Single Mode (and vice versa)
- Repeats/Extends Multimode to Multimode or Single
Mode to Single
Mode
- Extends distance between
nodes
- Supports
Data Rates Up to 200 Mbps
- 6 Diagnostic
LEDs
- Local/Remote Loopback
- Test Signal Generator
- Dry Contact Alarm Relay
- Built-In
Audible Alarm Buzzer
Description
The
TC3005 "MAXI" Multimode-to-Single Mode Fiber Optic Converter
converts multimode formats to single mode formats, or vice
versa, for data transmission up to 200 Mbps. Transmission
distances to more than 100km are possible with the Laser 1550nm
option (34dB loss budget).
The
MAXI will convert or repeat all popular wavelengths including
850nm, 1300nm or 1550nm over single mode or multimode fiber
optic cable. It is compatible with most communication
technologies including Ethernet, Token Ring, TAXI, OC1/OC3, ATM,
FDDI and SONET.
The
MAXI provides users with several key features including , Dry
Contact Relay Alarm, Audible Alarm Buzzer, Power Redundancy, and
standalone or rack mount modularity.
The
Dry Contact Alarm Relay, which includes an audible alarm buzzer,
identifies Optical Signal Loss on either the multimode or single
mode ends.
Power
redundancy is load sharing and switches over automatically in
the event of a failure. Power can be either 12VDC (standard),
24VDC, -48VDC, or 115/230VAC with an external power cube.
Standalone versions are modular, i.e. used either in a
standalone chassis or in a Rack Mount
chassis. Standard connectors are ST
or FC type.
Four
DIP switches and eight LED indicators are provided to help
installation and troubleshooting. An extreme temperature
version (-20° to 70°C), Model TC3005T, is also available.
TC3005
Specifications
|
Data Rates |
|
TC3005 |
10 Mbps
to 200 Mbps
|
|
Optical |
|
Transmitter |
ELED/LASER |
|
Receiver |
PIN
DIODE |
|
Wavelength |
850nm or 1300nm Multimode |
| |
1310nm or 1550nm Single
Mode |
|
Fiber Optic connectors |
ST, FC
or SC |
|
Loss Budget |
|
TC3005-01/03 |
Multimode @
850/1300nm: 15dB |
|
TC3005-L1 |
Single Mode @ 1310nm:
20dB |
|
TC3005-L2 |
Single Mode @
1310nm: 25dB |
|
TC3005-L3 |
Single Mode @
1310nm: 30dB
|
|
TC3005-L7 |
Single Mode @
1550nm: 30dB |
|
System |
|
Bit error rate |
1 in l09
or better |
|
Power |
|
Power source |
I2VDC @700ma |
|
optional |
115 or 230 VAC
24 VDC, 48 VDC |
|
Temperature |
|
Operating |
00C to 500C |
|
Hi-Temp
(optional) |
-20° to
70°C |
|
Storage |
-400C to 900C |
|
Humidity |
95% non-condensing |
|
Physical (Standalone/Wallmount
Unit) |
| Height |
(3.53
cm) 1.4" |
|
Width |
(18.14
cm) 7.1" |
| Depth |
(16.57
cm) 6.5" |
| Weight |
(512
gm) 1.5 lbs |
Typical Application
(Application Questions)
Fiber Optic Converter/Repeater
Application Questionnaire (click here)
The
MAXI Mode Converter is used to convert multimode to single mode, or vice
versa, in a variety of LAN and Telephony communication environments
including PABX, Ethernet, Token Ring, FDDI, ATM & SONET (OC1 & OC3). This
conversion is done to cross-connect different fiber types, regenerate
optical signals and/or extend transmission distances.
Electronics