TC Communications
Fiber Optics Modems Multiplexers Converters Video SONET LAN Ethernet
Scada ITS Security Teleconferencing
Model TC3006
Fiber Optic Mode Converter/Repeater
 |
 |
|
TC3006S Standalone Unit |
3 X
TC3006R (Housed in TCRM192) |
Features
Product or Application Questions (click
here)
- Data Rates up to 1000Mbps
- Repeats Multimode and Single
Mode Signals
- Two-way Communication
on One Fiber (optional, single mode only)
- Distances up to 100km
- Local Dry Contact
Alarm Relay
- 8 Diagnostic LED
Indicators
- Built-In Redundant
Power Supply
- Standalone or Rackmount
(Interchangeable)
Description
The TC3006
“MAXI” Gigabit Ethernet Multimode-to-Single Mode Fiber Optic Converter
converts multimode formats to single mode formats, or vice versa, for
Gigabit data transmission. It also repeats the multimode & single mode fiber
signals. Transmission distances to more than 100km are possible with the
Laser 1550nm option (34dB loss budget).
The MAXI will convert or repeat all popular wavelengths 850/1300nm Multimode
or 1300/1550nm Single Mode. It is compatible with Gigabit Ethernet standards
1000Base-SX and 1000Base-LX.
The MAXI provides users with several key features including Local & Remote
Loopback, Dry Contact Relay Alarm, Audible Alarm Buzzer, Power Redundancy,
and standalone or rackmount modularity.
The Dry Contact Alarm is particularly beneficial. Along with an audible
alarm buzzer, it identifies Optical Signal Loss on either the multimode or
single mode ends.
Power redundancy is load sharing and switches over automatically in the
event of a failure. Power can be either 12VDC (standard), 24VDC, -48VDC,
125VDC or 115/230VAC with an external power cube. Standalone versions are
modular, i.e. used either in a standalone case or in a rackmount assembly.
Standard connectors are ST, SC or FC type.
Four DIP switches and eight LED indicators are provided to help installation
and troubleshooting. A hardened temperature version (-20o to 70oC), Model
TC3006T, is also available.
TC3006
Specifications
| Data Rates |
| TC3006 |
up
to 1000 Mbps |
| Optical |
| Transmitter |
ELED/LASER |
| Receiver |
PIN
DIODE |
| Wavelength |
850nm or 1300nm Multimode |
| |
1310nm or 1550nm Single
Mode |
| Fiber Optic connectors |
ST, FC
or SC |
| Loss Budget |
|
TC3006-01/03 |
Multimode @ 850/1300nm: 16dB
|
|
TC3006-L1 |
Single Mode @ 1310nm:
20dB
|
|
TC3006-L2 |
Single Mode @ 1300nm: 25dB
|
| TC3006-L5 |
Single Mode @ 1300/1550nm: 34dB
|
| System |
| Bit error rate |
1 in l09 or better |
| Power |
| Power source |
I2VDC @700ma |
| optional |
115 or 230 VAC
24 VDC, 48 VDC |
| Temperature |
| Operating |
00C to 500C |
| Hi-Temp
(optional) |
-20° to
70°C |
| Storage |
-400C to 900C |
| Humidity |
95% non-condensing |
|
Physical (Standalone/Wallmount
Unit) |
| Height |
(3.53
cm) 1.4" |
| Width |
(18.14
cm) 7.1" |
| Depth |
(16.57
cm) 6.5" |
| Weight |
(512
gm) 1.5 lbs |
Typical Application (Application Questions)
Fiber Optic Converter/Repeater
Application Questionnaire (click here)
The MAXI Mode Converter is used to convert multimode to single mode, or vice
versa, in a variety of LAN environments including Gigabit Ethernet Switches
and Routers. This conversion is done to cross-connect different fiber types,
regenerate optical signals and/or extend transmission distances. It can also
be used to repeat a Gigabit signal on multimode or single mode fibers.
Electronics