PROVIDING SOLUTIONS  FOR  FIBER  OPTIC COMMUNICATIONS

 

Model TC1630R/S T1/E1 Fiber Optic Modem  TC1630S Standalone Unit              TC1630R Rackmount Cards Mounted in TCRM192 Rear View   Features Product or Application Questions (click here) Distances up to 40 km Local/Remote Loopback Supports AMI/B8ZS/HDB3 Line Codes Eight LED Indicators No Jitter Multimode or Single Mode (850/1300/1550) Low Power Consumption (3 Watts) Full Digital Technology Design 12/24/-48VDC, 125VDC or 115/230VAC Power High Temperature (-20°C to 70°C or -40°C to 80°C) Version Optional Description A highly reliable link between two T1/E1 devices, the TC1630R/S T1/E1 Fiber Optic Modem is available as rack mount or standalone, in both multimode and single mode (850/1300/1550nm) versions. The TC1630R/S provides a wide variety of innovative and standard features to benefit its users. Innovative features include Terminal Block and RJ-45 connectors, “hot-swappable” cards, 22 diagnostic LEDs  long distance version to 80km (1550nm, Single Mode), and an extreme temperature (-20oC to 70oC or -40°C to 80°C) version. Standard features include Multiple Power Options (12/24/-48VDC/125VDC & 115/230VAC), No Jitter, Power Redundancy, Optical redundancy (optional), Local & Remote Loopback, Low Current Consumption (200mA), Local Dry Contact Alarm Relay and a replaceable Line Interface Module. The 22 different diagnostic LED functions include all 1’s detection, Power Alarm, T1/E1 Signal Loss (local & remote ends), BPV violations, and Sync Active. Eight DIP switches, accessible from the front panel, provide line settings for line code, line length, local loopback or remote loopback.  An intelligent line code setting switch is provided to eliminate potential user confusion, such as mismatching a line code/line length setting. The TC1630R/S is transparent to the framing format and supports AMI, B8ZS and HDB3 line codes and DSX-1 (T1) cross connect distances from 0 to 655 feet.  It includes an internal elastic buffer to remove jitter from transmit data. The TC1630R/S is compatible with all popular sizes and types of fiber optic cable.  Fiber optic connectors are ST or FC.  Electrical connectors are detachable Terminal Blocks and RJ45 (RJ-48C).  The TC1630R Card version is used with the TCRM192 Rack Mount Card Assembly which can hold up to 10 modems.  Cards can be removed or installed under power (“hot-swappable”).  Two TC1630R Modems can be used with the TCRM196 19” 1 “U” High Rackmount Card Cage. NOTE: The TC1630 is 100% compatible with its predecessor Model TC1620. TC1630 Specifications Data Rates T1 1.544 Mbps E1 2.048 Mbps Optical Transmitter LED/ELED Receiver PIN Diode Wavelength 850nm/1300nm multimode   1310/1550nm single mode Fiber Optic connectors ST (FC optional) Loss Budget    Multimode 850nm/1300nm @62.125um - 20dB Single Mode 1310nm/1550nm @9um - 20dB Electrical Connector Detachable Terminal Block Interface T1 or E1-75 Ohm or 120 Ohm Bit error rate T1/E1 1 in l010 or better Visual Indicators System Power, Alarm T1/E1 Status O-Sync, BPV, A1S, T1/E1 OK, RMT1-0, RMTLB Power Standard 9 to I2VDC @250mA optional: 115 or 230VAC with external power cube optional: -24/-48/125 VDC   Temperature Operating -100C to 500C Hi-Temp (optional) -20°C to 70°C or -40°C to 80°C Storage -400C to 900C Humidity 95% non-condensing Physical Height (2.79 cm) 1.1" Width (12.70 cm) 5.0" Depth (6.35 cm) 2.5" Weight (147.0 gm) 5.2 oz. Typical Application (Application Questions) The TC1630R/S Fiber Optic T1/E1 Modem is typically used to link Channel Banks, PBX's, and M13 Multiplexers to DSX-1 Cross Connects.  It is also used to link Customer Premises Equipment to CSU/DSUs and with metallic medium T1/E1 multiplexers to transmit over fiber optic cable.