PROVIDING SOLUTIONS  FOR  FIBER  OPTIC COMMUNICATIONS

 

Model TC1710 Universal Sync/Async Fiber Optic Modem Features Data Rates up to 10Mbps Distances Up to 80km*  All Popular Electrical Interfaces Built-In Test Signal Generator Local & Remote Loopback Interchangeable Interface Multimode & Single Mode Mode (1300/1550nm) Built-In Power Redundancy Local Dry Contact Alarm Relay Standalone/Wallmount or Rackmount Temperature Hardened (-20°C to 70°C & -40° to 80°C) Versions Optional             TC1705 Stand Alone                TC1710 Rack Mount Description The TC1710 is the ultimate "configure-it-as-you-need-it" fiber optic modem.  Ideal for applications requiring high data rates, it supports asynchronous data rates up to 10Mbps and synchronous rates up to 5Mbps.  It supports most popular electrical interfaces including RS-422, RS-485 (2-wire or 4-wire), RS-530, V.35 and TTL.  Electrical interfaces are modular and can be easily changed before or after installation.  Distances up to 80km* are possible depending on various factors including electrical interface, optical transmitter, number of fiber optic connectors and fiber type and quality.  Power redundancy is standard. Optical redundancy is optional. Diagnostics are extensive and include a built-in Test Signal Generator, local & remote loopback tests and LEDs for Power, Alarm, Tx, Rx and all applicable control signals.  The Test Signal Generator verifies both device and fiber optic link operation.   Available for multimode (1300nm) or single mode (1300/1550nm), the TC1710 is compatible with all popular sizes and types of fiber optic cable.  Fiber optic connectors are ST or FC.  Electrical connectors are DB25 female.  Power is 12VDC (standard), 24VDC, -48VDC, 125VDC or 115/230VAC with an external power cube.  The TC1710 is available in two versions: TC1710R Rackmount Card for installation in a 19" rack assembly (TCRM192 or TCRM196) or TC1710S Standalone version.  Standalone or rackmount versions can be mixed or matched on either end.  There are two optional versions (Model TC1710T)  for extreme temperature applications (-20° to 70°C & -40° to 80°C). *Contact factory for higher requirements (Laser version).   TC1710 Specifications     Data Rates RS-530, V.35, TTL (Sync) up to 5Mbps RS-485, RS-530, TTL, (Async) up to 10Mbps Optical Transmitter ELED, LASER* Receiver PIN Diode Wavelength 1300nm Multimode 1300nm, 1550nm Single Mode Fiber Optic Connectors ST, FC or SC Loss Budget* (850nm, 1300nm, 1550nm) Multimode (62.5/125µm): 15dB Single Mode (9/125µm): 15dB Electrical Connector DB25 Female Interface RS-422/RS-530, RS-485, V.35, or TTL System Bit Error Rate 1 in 109 or better Alarm Dry Contact Normal Open * Contact factory for higher requirements Visual Indicators System Status PWR A, PWR B, Vcc, ALARM, DTE, USE-A Electrical Signal Status TXD, RXD, RTS, CTS, DTR, DSR, TXCLK, RXCLK Optical Signal Status RxA, RxB Diagnostic Function Local & Remote Loopback Test Power Standard 12VDC @ 500mA Optional 24VDC, -48VDC, or 115/230VAC (with external power cube) Temperature Operating -10° to 50°C Hi-Temp1 (optional) -20° to 70°C Hi-Temp2 (optional) -40° to 80°C Storage -40° to 90°C Humidity 95% non-condensing Physical (Standalone/Wall Mount Unit) Height (3.53 cm) 1.4" Width (18.14 cm) 7.1" Depth (16.57 cm) 6.5" Weight (192 gm) 5.44 oz Applications The TC1710 High Speed Fiber Optic Modem is intended for applications requiring high data rates and handshaking.