TC Communications
fiber optics,
Modems, Multiplexers, Converters, Video, SONET, Security,
fiber Optic Modem, Multiplexer, Converter, Video, SONET, LAN,
Ethernet, Scada, ITS, Security, Teleconferencing
Model TC8108
8 - 128 Channel
Fiber Optic Multiplexer
Features
- 8 to 64 Channels
(Expandable to 128)
- Data Rates Up to 38.4 Kbps
(32 Ch.)
- Built-In Power
Redundancy
- Optional Optical
Redundancy
- Local Dry Contact
Relay Alarm
- Built-In Test Signal
Generator
- Local & Remote
Loopback Features
- Multimode or Single
Mode (850/1300/1550nm)
- Extend telephone lines with
TC1900 RS-232/Fiber Phone Extender
- Rack
Mount or Stand Alone
Description
The TC8108 Fiber Optic
Multiplexer, maximizes user flexibility by offering field interchangeable
interfaces, modular expandability from 8 to 64 channels and power/optical
redundancy. It supports most popular interfaces including RS-232, RS-422,
TTL, RS-485* and Dry Contact Relays. It supports data rates up to 38.4
Kbps*. Power redundancy is standard, optical redundancy is optional. Both
feature automatic switchover.
Each TC8108 unit consists of an 8-channel base unit
and up to seven optional 8-channel add-on PC Cards. These PC Cards can be
“Stacked” (in 8-Channel increments) up to 64 Channels. A 128-Channel version is
possible by using a fan-out cable to expand each RJ-11 port into two RS-232
Async channels. For units with more
than 24 Ch., the TCRM191 Rackmount Card Cages are required.
Because the electrical interfaces are modular, they are interchangeable at any
time--before or after installation. A user can mix up to four different
interfaces (in 2-Channel increments) on each 8-Channel card. Each PC expansion
Card is identified by a card number defined by a front panel DIP switch.
Diagnostics are extensive and include Local and Remote Loopback, 22 LEDs, and a
Test Signal Generator. LEDs include “Tx”, “Rx”, “Alarm”, “Vcc”, “RxA”, “RxB”, &
“PWR”. Individual “Tx” and “Rx” LEDs are provided for each channel. The
built-in test signal generator verifies both device and fiber optic link
operation. This feature benefits users by helping technicians verify that both
local & remote devices and the fiber optic link are operating normally. No
other test equipment is required for link and device verification.
The TC8108 is compatible with all types and sizes of multimode (850/1300nm) or
single mode (1300/1550nm) fiber optic cable. Fiber optic connectors are ST or
FC; electrical connectors are RJ-11. Power is 12VDC or 115/230VAC with an
external power cube. An extreme temperature version (-20° to 70°C), Model
TC8108T, is also available.
Fiber optic connectors are
ST; FC is optional. Electrical connectors are RJ11. Power is 9 to 12VDC or
115/230VAC with a power card (Model TCRMPS-01) or a power cube.
TC8108
Specifications
|
Data Rates (per channel) |
Async 8/16/24/32 Channels
Async 40/48/56/64 Channels
Async 128 Channels
Sync (16 Channels with External Clock)
Sync (32-Channel Version with Ext. Clock) |
Up to 38.4
Kbps
Up to 19.2 Kbps
Up to 16 Kbps
Up to 38.4 Kbps
Up to 19.2 Kbps |
| Channel
Capacity |
| Async
without Control |
8; stackable to 64 Channels
(up to 128 Channels with Fan-Out
Cables) |
| Sync |
4; stackable to 32 Channels |
| Optical |
| Transmitter |
LED/ELED |
| Receiver |
PIN |
| Wavelength |
850nm/1300nm
multimode |
| |
1310nm/1550nm single
mode |
| Fiber
Optic connectors |
ST
or FC |
| Loss
Budget |
15dB
multimode 850nm/1310nm @62.5um |
| |
15dB
single mode 1310nm/1550nm @9um |
| Electrical |
| Connector |
RJ11 |
|
Interface |
RS-232
(standard), RS-422, RS-485 (2 or 4 wire), Dry Contact Relay, TTL
|
| System |
| Bit error
rate |
1 in l09
or better |
|
Visual Indicators |
System
Channel Status (each channel)
Optical Signal Status
Local Loopback, |
PWR A, PWR B, VccA, VccB, ALARM
Tx, Rx
RxA, RxB, Optic
Rx, FCLK |
|
Diagnostic Function |
Signal
Generator |
| Power |
| Standard |
12VDC @ 600ma |
|
Optional:
|
24VDC, -48VDC, or 115/230VAC with external
power cube or card |
| Temperature |
| Operating |
-100C
to 500C |
| Hi-Temp
(optional) |
-20° to 70°C |
| Storage |
-400C
to 900C |
| Humidity |
95%
non-condensing |
| Physical |
| Each PC Card |
Height
(18.10 cm) 7.1" |
| |
Width
((3.53 cm) 1.4" |
| |
Depth
((24.80 cm) 9.8" |
| |
Weight
(280 gm) 8 oz. |
Typical Application (Application Questions)
The TC8108
is an inexpensive, reliable and flexible method for connecting
large numbers of printers, terminals and status collecting devices.
It is often used in harsh environments where EMI/RFI interference,
ground loops or lightning conditions may exist. The TC8108 can also be used
to extend telephone lines to remote locations with the Model TC1900
RS-232/Fiber Phone Extender.
Electronics