Model TC8510
.1-4
Ch. T1/E1, Data & 10/100 Ethernet Fiber Optic
Multiplexer
|
 |
 |
|
TC8510S
Standalone Unit |
TC8510R with
TCRM195 19" Card Cage
|
Features
Product or Application Questions (click
here)
-
Multiplexes 1 - 4 Ch. T1/E1 and 10/100 Ethernet, Optional RS-232,
RS-530, V.35
-
Network Management (SNMP, Web, Telnet)
-
Ethernet Rate Control
-
Two-Way "One Fiber" Option
-
Multimode or Single Mode (1300/1550nm)
-
Power Redundancy, Optical Redundancy Optional
-
Industrial Hardened (optional)
-
12VDC, Optional 24VDC, -48VDC, 125VDC or 115/230VAC
-
Hi-Temp2 Version Exceeds NEMA & Caltrans Traffic Control Specs
Description
The TC8510 Ethernet & T1/E1
Fiber Multiplexer provides 10/100 Ethernet and T1/E1 Connectivity. It
multiplexes various combinations of one-to-four T1/E1 or Serial Data channels
and a 10/100M Ethernet over single mode (1300/1550nm) or multimode fiber
(1300/1550nm).
The TC8510 supports distances to more than 100 km and offers a two-way, “one
fiber” communication option to maximize fiber cable usage. Optional redundant
power and optics include automatic switchover for maximum reliability.
Setup, diagnostics and control is accessed via Serial Terminal, Telnet or SNMP
management ports. Diagnostics include LED indicators, dry contact alarms and
local and remote loopback.
The Ethernet port supports full 10Mbps bandwidth and rate control in increments
of 32Kbps. It is IEEE 802.3/802.3u/802.3x compliant. Each T1 or E1 channel is
independent, transparent to the framing format and supports all applicable
standards and line codes. Serial interface options are RS-232, RS-422, RS-449,
RS-530 and V.35.
The TC8510 is available basic standalone or 1U high “pizza box.” Fiber optic
connectors are ST, FC or SC. Standard power is 12VDC and includes built-in
redundancy. Optional power sources include 24VDC, -48VDC, 125VDC or 115/230VAC
with an external power cube. |
TC8510 Specifications
|
Data
Rates |
|
T1 |
1.544 Mbps |
|
E1 |
2.048 Mbps |
|
Ethernet
|
10/100
Mbps (10M on fiber side) |
|
RS-232 |
Up to 120 Kbps |
|
RS-422, V.35 |
Up to 1Mbps |
|
Channel
Capacity |
|
T1, E1 or
any combination |
4 |
|
Ethernet |
1 |
|
RS-232,
RS-422, TTL, Dry Contacts |
4 |
|
Optical |
|
Transmitter |
ELED, LASER |
|
Receiver |
PIN Diode |
|
Wavelength |
1300nm Multimode
1310nm, 1550nm Single Mode |
|
Fiber Optic
Connectors |
ST, optional FC or SC |
Loss Budget*
(1300nm, 1550nm) |
Multimode (62.5/125µm): 15dB
Single Mode (9/125µm):
20dB |
|
Electrical
|
|
Interface
|
T1, E1 (G.703), IEEE 802.3,
RS-232, RS-422, V.35 |
|
T1 Connector |
(100 Ohm) Terminal Blocks |
|
E1 Connector
|
(120 Ohm) Terminal Blocks |
|
E1 Connector |
(75 Ohm) Terminal Blocks to
BNC Adapter |
|
10/100
Ethernet Connectors |
RJ45 (Female) |
|
RS-232,
RS-422, V.35 Connectors |
RJ45 (Female) |
|
|
System |
|
Bit Error
Rate |
1 in 10^9 or better |
|
Visual
Indicators |
|
System |
PWR A, PWR B, VccA, VccB,
ALARM |
|
Channel
Status |
RXD, RLOS, LOS, RLPB, BPV,
Alarm |
|
Optical
Signal Status |
SyncB, Optic in Use, RXA,
RXB, VLIN |
|
Diagnostic Functions
|
|
Local and Remote Loopback |
|
Alarm |
|
Dry Contact |
Normal OPEN |
|
Power |
|
Standard |
12VDC @ 500mA |
|
Optional |
24VDC, -48VDC, 125VDC or
115/230VAC (with external power cube) |
|
Temperature |
|
Operating |
-10° to 50°C |
|
High Temp
(Optional) |
-20° to 70°C |
|
Hardened
(Optional) |
-40° to 80°C |
|
Storage |
-40° to 90°C |
|
Humidity |
95% non-condensing |
|
Physical
(Standalone/Wallmount Unit) |
|
Height |
(6.70 cm) 2.6" |
|
Width |
(18.14 cm) 7.1" |
|
Depth |
(24.80 cm) 9.8" |
|
Weight |
(1.36 kg) 3 lbs.
|
|
Typical Application
(Application Questions)
Typical applications include extending SDH/SONET backbones and adding
Ethernet service to existing T1 or E1 fiber optic links. Service Providers
use the TC8510 as an efficient, cost effective method to provide their
customers with Ethernet (including Rate Control) connections for data and T1
for voice. The two-way “one fiber,” option can double usage of existing
fiber optic cable plants.
|
|
Electronics